Metering Data Transceivers (MDTs)
The largest selection of best-in-class Automated Meter Reading Transmitters to interface with nearly all water, gas and electric meters, available in either Standard range or the stronger MAX range for easier installation.
Pulse
Pulse
Standard or MAX Range
Description
The Pulse MDT records data from meters that generate a pulse output and transmits the totalizer data via radio towards the DCAP every hour. It is compatible with nearly all water, gas and electric utility meters that use a reed switch or a piezoelectric pulse generator. The MDT is available either with a single pulse input for single meter usage or dual inputs for co-located hot and cold water meters or other two-meter combinations.
Features
- The Standard Range MDTs have an open field range over 3500 feet and MAX Range Pulse MDTs have a ten-mile open field range
- The MDT is powered by two AA batteries with expected battery life of five to seven years
- Top-of-the-hour synchronize Time of Use (ToU) with 15-minute interval data
- Generated Pulse version for older Hersey and newer Zenner meters
- IP-68 rated Submersible version for pit or outdoor installation
Downloads
Pulse MDT/Standard Range Data Sheet
Pulse MDT/MAX Range Data Sheet
Encoder
Encoder
Standard or MAX Range
Description
The Range Encoder MDT has a true encoder interface that directly reads the meter face value of encoded meters to transmit an absolute reading towards the DCAP every hour. It auto-detects the data format between Sensus meters, Sensus compatible meters (Master-Meter, Badger, etc.), and Neptune meters. The MDT is available either with a single encoded input for single meter usage or dual encoded inputs for co-located hot and cold water meters. A special Pulse + Encoder Dual MDT is also available.
Features
- The Standard Range Encoded MDT has an open field range of over 3500 feet and MAX Range Encoded MDT has a ten-mile open field range
- It is shipped with two AA batteries for expected battery life of five to seven years
- MDT also reads Units, Count Factor, Hot/Cold from GWF meters
- IP-68 rated Submersible version for pit or outdoor installation
Downloads
Encoder MDT/Standard Data Sheet
Encoder MDT/MAX Range Data Sheet
Display
Display MDT
Standard or MAX Range
Description
The Tehama Wireless Display MDT combines our proven MDT transceiver with an LCD display to provide the easiest and most accurate way to comply with tenant meter reading access requirements in California and elsewhere. Available for both Pulse and Encoder meters, with dual input hot/cold models available, the Display MDT is designed to be placed inside tenant space and wired to the meter(s). The LCD screen displays the consumption for 60 seconds when the button is pushed, toggling between hot/cold for dual input models.
The Tehama Remote
Display is a display-only model without the AMR radio. It can be used if an existing AMR system is already installed or is not required. It comes with all the other benefits of our Display MDT including a very easy to use programming method.
Features
- Available in Standard Range and new MAX Range models
- Display shows units (Gallons or Cubic Feet) and Hot/Cold for dual units
- Mounts on standard single-gang electrical box for a professional looking installation
- NTEP certified. Approved for use in California
- Simple configuration via our CIT software using a communication cable
- Up to 3500 foot open field range
- LED indication for RF network status
- FCC certified for US and Canada
Downloads
Display MDT/Standard Data Sheet
Display MDT/MAX Range Data Sheet
Outsider®
Outsider®
Standard or MAX Range
Description
The Outsider® MDT combines direct meter reading with our proven AMR radio to provide a quick and simple assembly process. Our Outsider™ MDT slides directly onto the register housing of all NMT SingleMag™ and VersaMag™ water meters, secured by a single screw. With no wiring involved, we have eliminated the common errors that can occur during shipment and installation.
Like all our MDTs, the battery life exceeds five years and the AA batteries are field replaceable. The Outsider® MDT includes the case with locking ring, the MDT with batteries, and the screw for securing it to the meter register.
Features
- Available in Standard Range and new MAX Range models
- Up to 3500 foot open field range for Standard Range models and up to 10 miles open field range for MAX Range models
- Powered by two AA batteries with expected battery life of five to seven years
- Easy-to-Install: Slides onto the register of any NMT SingleMag or VersaMag water meter
- Plumber installations: With the integrated meter and MDT, a plumber can install everything at each meter point
- Reliable: Combining the proven technologies of Tehama and NMT in an easy to install system helps ensure proper and long-lasting installations
Downloads
Outsider® Data Sheet
Submersible
Submersible
Standard or MAX Range
Description
The Tehama Wireless Submersible MDT combines our MAX Range MDT with a dedicated enclosure with epoxy encasement to provide a fully waterproof product. It comes in 2 variations, a backward compatible version that operates in existing Tehama networks and our new MAX Range version. All Submersible MDTs now include an internal temperature sensor for freeze detection.
Features
- Up to 3500 foot open field range for Standard Range models and up to 10 miles open field range for MAX Range models
- Lithium battery lasts 10- 15 years
- Pulse Model compatible with nearly all utility meters
- Encoder Model to read Sensus & Neptune meters
- Easy installation in pit meters : can be screwed or taped to the bottom of the plastic pit lid
- LED indication for RF network status
- Magnet activation for instant transmission, status and for On/Off state
- FCC certified for US and Canada
Downloads
Submersible Data Sheet
Leak Detection
Leak Detection
Standard or MAX Range
Description
The Leak Detection MDT helps property owners monitor for water leaks near hot water tanks, under sinks, boiler/basement room floors, or anywhere that water could flood or damage the property. When water is detected, a message is immediately sent to the DCAP allowing an alert via email.
Features
- Two-foot long water sensing cable
- Fully sealed MDT has a typical battery life of over 10 years
- Can detect freezing conditions with ability to send temperature-based alerts
- Up to 2 miles open field range for Standard Range models and up to 10 miles open field range for MAX Range models
Downloads
Leak Detection Data Sheet
Runtime
Runtime
Standard or MAX Range
Description
The Tehama Wireless Runtime MDT records the on-time in seconds for the most accurate measurement available, and transmits the running count via radio to the DCAP once an hour. Versions of the Runtime MDT can detect a 24VAC zone valve control state or a dry contact or relay switch input. Optionally the unit can be ordered with an internal temperature sensor for ambient readings or with the dry contact version an external thermistor for location accurate measurements.
Features
- Five year battery life under normal conditions. -Optional line powered variation for the dry contact switch
- The Time of Use option adds an on-board memory and 15 minute interval data backup
- DCAP’s time is set regularly via the Internet and tied to stratum 2 atomic clocks
Downloads
Runtime Data Sheet
Repeaters
Repeaters extend the range of the AMR network to provide full coverage to large and expansive sites. Most popular is our line-powered Repeater, but Tehama also offers an innovative solar-powered repeater kit that is easy to install and don’t require power.
The Solar kit comes with our third generation repeater, solar panel, lithium iron phosphate battery, charge controller, UV resistant outdoor enclosure, and pole mounting hardware.
Repeater
Repeater
Standard/MAX Range
Description
The updated Tehama Wireless Diversity Repeater extends the range of the AMR network by implementing a redundant mesh network to transport remote MDT data to the DCAP. Many repeaters can be used to fully cover the largest sites. As with the MDT, two way communication guarantees successful transmissions of data toward the DCAP.
Features
- Available in Standard Range and new MAX Range models
- Diversity Antennas for optimal performance
- Improved sensitivity compared to our prior Repeater
- Diversity plus Sensitivity eExtends range of MDTs and other Repeaters by up to 50%
- Multi-Color Status LED indicates Link Quality
- Over 2 mile open field range*
- Implements a redundant mesh network for reliable communication
- FCC certified for US, IC certified for Canada
Downloads
Diversity Repeater / Standard Range Data Sheet
Diversity Repeater / MAX Data Sheet
Solar Repeater Kit
Solar Repeater Kit
Standard/MAX Range
Description
The kit comes with our third generation repeater, solar panel, lithium iron phosphate battery, charge controller, UV resistant outdoor enclosure, and pole mounting hardware. It can also be mounted to a wall or other Unistrut structures.
Features
- Combining this with our Submersible MDT makes a perfect combination for use at mobile/manufactured home communities
- Long Life Lithium Iron Phosphate battery
- Excellent for larger spread-out sites that lack power supplies for repeaters
- Easily add a repeater to a site without the need of an electrician
Downloads
Solar Repeater Kit Data Sheet
Data Concentrating Access Points (DCAPs)
Now with Cellular Options!
The DCAP manages the Tehama AMR Network, capturing and storing data from all your meters via the MDTs. Using the DCAP's Internet, WiFi, or Cellular link, you will automatically receive Meter data every day by email, FTP, or you can pull via an API call.
DCAP
DCAP
Standard/MAX Range
Description
The DCAP is at the heart of the Tehama Wireless AMR system. The DCAP incorporates a powerful embedded computer and comprehensive database, along with an integrated radio transceiver to communicate with each and every meter node.
The database stores all site information so everything about the property is contained in one central location. In operation, the DCAP collects and stores meter readings from the various MDTs in the network, with historical data available instantly for over a year at most property sizes. Our CIT software provides an easy user interface for configuring the DCAP and monitoring each unit, including including setting alarm thresholds which trigger automatic email alerts sent from the DCAP when alarm conditions are detected.
Features
- Compact design with integrated radio transceiver unit with +28.5dBm output for long RF range
- Remote Access feature allows communication with DCAP when it is installed behind a firewall
- Reading data automatically sent daily from DCAP via email or to an (s)FTP site
- Database storage for over 4 million data points (nearly six months storage for 250 meters with our 15 minute ToU MDTs)
- 10/100M Ethernet or WiFi for easy access to data over the internet. Optional cellular service available if no Internet is available
- Integrated clock with alarm monitoring and configurable email alerts
- USB port for initial device setup (DCAP Passwords, WiFi credentials, and Static IP configuration). Requires programming cable.
- FCC certified for US, IC certified for Canada
Downloads
DCAP Standard Range Data Sheet
DCAP MAX Data Sheet
TFA DCAP
TFA DCAP
Description
The DCAP-TFA builds upon the proven Diversity DCAP platform by adding the ability to integrate data from Inovonics® based FA systems. In addition to receiving Tehama data from the integrated radio, the DCAP-TFA connects to an FA type submetering receiver and stores data from both networks simultaneously.
Features
- Easy migration path for older sites using obsolete FA technology without removal or replacement of the entire AMR system at the property
- A file import function to easily transfer site configuration data to the DCAP-TFA
- Daily reports can be received by email or FTP
- Historical hourly data from FA PMTs can be reviewed just like is always available from Tehama MDTs
- Standard Tehama DCAP features
Downloads
TFA DCAP Data Sheet
Solar DCAP Kit
Solar DCAP Kit
MAX Range
Description
The kit comes with our third generation Cellular DCAP, solar panel, lithium iron phosphate battery, charge controller, UV resistant outdoor enclosure, and pole mounting hardware. It can also be mounted to a wall or other Unistrut structures.
Features
- Combining this with our Submersible MDT and Solar Repeaters makes a perfect combination for use at mobile/manufactured housing communities
- Long life Lithium Iron Phosphate battery
- Battery sized to keep DCAP operating through seven+ days without Sun
- Excellent for larger spread-out sites that lack power or Internet
Downloads
Solar DCAP Kit
Software
Tehama’s CIT Software, Mobile App and Web App
The Configuration, Installation & Troubleshooting tool provides an easy way to configure the DCAP with site information and associations between the meters and wireless equipment. During installation, the software monitors the network to verify each and every MDT is installed and functional. Built-in troubleshooting tools identify potential problems in the network and provide detailed remediation instructions.
Through full access to the company Cloud Site list, the Mobile App provides everything that the field technician needs to not only update meter data like IMR, Count Factor, and Location, but also perform bucket test to ensure meter and AMR operation.
The Web App makes it easy for billing companies to make an API call to pull reads, and usage and configuration data is saved in the cloud. The DCAP stores all data locally as a backup.